UL Listed Touch-Screen Controlled 5 BBL 3-Vessel Electric Brewhouse – IN STOCK

Price: $75,500

1.1   1 Unit – 5 BBL Insulated Mash/Lauter Tun

· 304ss Insulated Lauter Tun, Vessel interior, and exterior are #4 brushed finish. Vessel bottom and cylindrical sides are insulated with a minimum 80mm of high heat, Rockwool insulation, 20” glass top manway. Solid Rectangular 18” side manway allows for easy access and grain out portage.

· SEW Motor & Gearbox, 2 HP

· 304ss Wedge Wire Screens, 0.7mm constructed in 3 sections and firmly affixed to vessel floor, removable sections allow screen sections to be removed. 5 wort draw off concentric ports provides even runoff for Lauter and Vorlauff.

· Grist Hydrator Assembly is top-mounted and post hot/cold liquor mixing station for consistent grist hydration of the Mash.

· Under Screen CIP System with sprayer head assemblies allow the bottom of Lauter screens and vessel dish bottom to be cleaned in place.

· RTD Mash Temperature sensor for monitoring internal mash temperature inserts into welded Thermowell on the vessel sidewall. Removable from the vessel’s exterior in event of probe failure, even while the vessel is full.

· Sparge Assembly and Hot/Cold mixing spool with manual globe valves to allow both hot and cold liquor to be blended en route to Mash Tun or Sparge ring assembly.

· Digital flow meter allows for accurate strike temperatures, liquor volume measurements, consistent liquor to grist ratios and batch totalizer for monitoring total strike/sparge volumes.

· Flu Ventilation pipe to prevent vacuum formation and balance tank pressure for atmospheric equalization during mashing, filling, and emptying vessels.

· CIP Tank Spray ball has spinner spray heads and under screen CIP system.

· Lauter Tun Manometer level gauges to monitor mash bed pressure differential.

· Interior vessel Illumination, natural spectrum light mounted inside the vessel dome.

· Adjustable Footpads ball on plates, allow for leveling of the vessel on sloped floors.



1.2   1 Unit – 5 BBL Brew Kettle / Whirlpool

· 304ss Electric Brew Kettle / Whirlpool with electric heating elements.

· 3 x 12 kW Heating Elements.

· 80mm Rockwool insulation within the vessel walls.

· Glass Manway allows for increased visibility.

· Integral drip ring on the Kettle exhaust stack base.

· Kettle Temperature sensor for accurate process control.

· Integral Whirlpool to separate Hot Break & Trub with Trub dam.

· Wort Pump, with variable speed control.

· CIP Tank Spray ball has a spinner spray head assembly.

· Adjustable Levelers to provide a level platform regardless of floor slope.



1.3    1 Unit – US-Made Integrated Control Panel (UL Listed)

· Industrial Touchscreen Control Panel, 304ss, watertight case. Mounted on brewer’s platform with 9” touchscreen Siemens controlled brewers CPU Integrated module.

· Integral Controls allows for intuitive Brewhouse operation and Cellar Control functions from one central location on the Brewhouse platform. Includes readouts and controls.

· Pump Controls and Variable Speed frequency drive for Mash Pump and on/off controls for Hot Liquor Pump.



1.4     1 Unit – Plate Heat Exchanger

· 304ss 2-Stage Plate Heat Exchanger for chilling 200°f Wort to 68°f with 10bbl/30minutes knockout capability. Stainless steel plates and frame assembly.

· Wort Thermometer upon exit of PHE to accurately stabilize wort temperature.

· Aeration Stone Assembly, including 3A certified Tee’s, non-threaded sanitary sintered aeration stone, and sanitary gas check valve, with sight glass.



1.5     1 unit – Working Platform

· 304ss Staging Platform between Brew House Vessels, with stainless non-slip grating, stairs, and handrails. Can be configured to your location and design layout.

· 304ss Frame Assembly, with mounted hard piping firmly affixed.

· Adjustable Levelers to provide a level platform regardless of floor slope.



1.6     1 Unit – Integrated 5 BBL HLT in Stack

· 304SS Interior and Exterior Frame Hot Liquor Tank.

· Polished to a #4 finish exterior, with a 0.8µm sanitary finish inside.

· Temperature Thermowell with included RTD sensor installed.

· 3 x 12 kW Heating Elements.

· Ampco Hot Water/Liquor US-Made Pump.

Share this listing



Q & A

log in or create an account to view Question & Answers

Contact Info & More

Please login to view contact info