Blichmann Gas Tower of Power, LTE stand and Burner

Price: $500

Blichmann Tower of Power gas fired Control Module.
With the TOWER of POWER™ control module, ramp times are fast and automatic, with outstanding control and easy maintenance of +/-0.5°F (0.28°C) stability. Free TOP-Link software and optional communication cable can be purchased to easily program an unlimited number of mash profiles and even monitor and log data on your PC. This level of automation brings reproducible results every time, taking your brewery to the same level as a professional brewery.AUTO RAMPING

For accuracy and precision, you need both a high-quality sensor and a high-quality meter that can read it. The TOWER of POWER™ uses a Class A precision RTD and a high-quality metering circuit found in PIDs and PLCs. Only the TOWER of POWER™ delivers that level of accuracy – so accurate and precise you can use it to calibrate your other instruments!

We aren’t kidding when we say the TOWER of POWER™ offers superior precision and accuracy. The control module will hold your mash within +/- 0.5°F (0.28°C). With this level of precision, repeatable with your beer will become the norm in your brewery.

PRECISION & ACCURACY

Purchase a single control unit for your mash tun, one for your hot liquor tank, or both! Already have a pump and all the plumbing for your system? No problem! All you will need are the control units. Should you need the pump and plumbing in a compact and convenient freestanding configuration, the control stand can be purchased separately. And the TOWER of POWER™ control stand even bolts to our TopTier™ stand with the optional mounting kit. Looking for a more compact stand? Check out our LTE controller stand.

MODULARITY

We have developed this modular control system in much the same way as our modular TopTier™ brewing stand — for adaptability and the ultimate in quality.

The TOWER of POWER™ temperature control module from Blichmann Engineering™ is like nothing on the market! This RIMS system temperature control module is high-quality and ultra-high accuracy! It also bears the Blichmann Engineering™ hallmark of simplicity! Offered in gas or electric versions, these controllers work in concert with our suite of equipment options to complete your Blichmann Engineering™ system or act as a freestanding control powerhouse!
The gas TOWER of POWER™ control module includes the following features:

Class A precision RTD temperature sensor. The sensor can be installed in BrewMometer™ hole in your kettle for an HLT or into any 1/2″ NPT fitting with the included adapter bushing
Pilotless electronic ignition control system that adapts to any burner (natural gas or propane), not just those produced by Blichmann Engineering™. This ignitor will instantly relight your burner if blown out by a wind. It will also shut down your gas if a flame is not detected within 10 seconds and sound an alarm. It includes an industrial ignition electrode and high-quality silicone sheathed ignition wire.
American-made gas solenoid valve (installs on your burner gas supply)
Convenient cable storage tray in the back of the enclosure to neatly store wires between brew days
Plumbing to connect the gas regulator to the burner
Data port for optional remote monitoring and mash-profile programming (unlimited profiles) on your PC (Optional communication cable required)
One decal for MASH and one for HLT for appropriate labeling
Compact enclosure of 4.25″W, 7″H, 7″D that is easily integrated into your brew system
Brushed stainless cover and gloss black powder-coated case that will look beautiful for years

TOWER OF POWER™ LTE STAND

Introducing the Tower of Power™ LTE Stand; a smaller and lighter version of the basic ToP stand. When collapsed it’s small enough to fit neatly in one of your BoilerMaker brew pots for storage. Comes with or without a RipTide™ pump, a place to mount your Therminator™, and can be fitted with one BrewCommander™ Control Module (Control Module, Therminator™, and Therminator™ mounting hardware sold separately).
Skip to the end of the images gallery

Tower of Power™ LTE stand in extended position, shown with optional RipTide™ pump.

FEATURES
Our TopTier™ burner lit the brewing world on fire in 2009 with the first burner made specifically for the needs of the homebrewer. No wonder it became the best selling and most respected homebrew burner in the market. Never resting, our team of beer Engineers and avid homebrewers just reinvented what a burner should be. Efficient, fast, and versatile.

Skip to the beginning of the images gallery

FEATURES
The Tower of Power™ LTE Stand is a great option for those who want the functionality of the Tower of Power™ stand, but are tight on space. When collapsed, the stand fits neatly into your BoilerMaker brew pot, so it’s easy to store. It might look cute, but this bad boy sure is tough and will make your brew day that much easier. It will also make a great addition to those wanting to upgrade to the BrewEasy™ system that already have BoilerMaker™ brew pots! It comes in two different options: with or without a RipTide™ pump. If you already own a brew pump, it comes with the necessary hardware to mount it to the stand.

Stand Includes:

Stand
Control Module Mounting plate
Two Piece ball valve
Temperature Sensor Fitting
All necessary hardware
NOTE: Tower of Power Control Module, Therminator, and Therminator mounting hardware sold separately.

Share this listing

Q & A

log in or create an account to view Question & Answers

Contact Info & More

Please login to view contact info

Login/Register