New, 10bbl Stout Tanks Seltzer system. 2-10bbl fermentors, 1-10bbl brite, 5HP Chiller. Includes everything needed. Please see complete list below or contact for copy of invoice.

More pictures available upon request. Most parts are still in boxes.

 

BK485EL4-LH-INS (2647). 10 BBL/485 Gal. Insulated Brew Kettle with Conical

Bottom, Domed top with manway, 6-in. vent, and integrated (removable) CIP

spray ball, thermowell, tangential inlet, sight glass, (3) 1.5in. Butterfly valves,

clamps/gaskets. Insulated sides. Includes (4) 2“TC electric element ports and 1

level sensor port. 57” diameter x 86“H.

Fittings and manway oriented for use on the left hand side of a brewers platform.

(We also offer Non-Insulated kettles at a lower cost)

SP10CON (2474). Condensate stack for a 10 bbl kettle. 6” diameter pipe, total

length = 42“, center to center pipe distance = 36.5”.

Hose Assembly, 1.5-in. Insulated Brewers Hose with 1.5-in. TC ends installed. 20

ft. Long.

Hose Assembly, 1.5-in. Insulated Brewers Hose with 1.5-in. TC ends installed. 15

ft. Long.

Hose Assembly, 1.5-in. Insulated Brewers Hose with 1.5-in. TC ends installed. 10

ft. Long.

Hose Assembly, 1.5-in. Insulated Brewers Hose with 1.5-in. TC ends installed. 5

ft. Long.

*********************

Updated pump to Ampco and changed number of unitanks to total of 2

*********************

CF10BBL-JKT-SHORT (PDX). (8662) 10 Bbl Jacketed Conical Fermenter –

SHADOWLESS Side Manway. Two zone jacketing is in cone and on side wall. Rated

to 2BAR (29 psi). Includes racking arm. 388 gal. total capacity.

Includes racking arm, CIP arm and spray ball, sample valve, racking arm, 2

butterfly valves, adjustable feet. Top of tank has a 4“ dry hopping port with cap

and (2) 1.5” TC ports without caps.

Constructed of 304 stainless steel, tank material thickness is 3mm, jacket and

outer shell thickness is 2mm. 51.5-in. diameter x 96-in.H. Cone has 70 degree

interior angle. 30 psi rating.

BB10BBL-JKT. (8230) 10 Bbl Jacketed Brite Beer Tank. Side Shadowless Manway.

Rated to 2BAR (29 psi). Two zone jacketing (on side and bottom so it can work

well as a serving tank). Includes CIP arm and spray ball, sample valve, 2 butterfly

valves, fittings for sight glass tubing (connects to CIP arm and bottom outlet for

ease of cleaning – use clear draft beer line, not included). Constructed of 304

stainless steel, tank material thickness is 3mm, jacket and outer shell thickness is

2mm, includes adjustable feet. FOB Portland, OR.

Dimensions: 43.5-in. diameter x 93-in.H. Total capacity = 359 gallons.

SP-PRV-1.5TC-30. Dwg# 18431. Pressure/Vacuum Relief Valve (30PSI, 1.5“

Tri-Clamp). SP1.5PRV-30

SP30PG-BACK (8033SS-STK). Pressure gauge, 30 psi. All Stainless Steel Case

AND Internal Components, 1/4 inch male NPT threads. 30 psi max. BACK MOUNT.

SP8CS-20 (8915). 20mm OD x 8-in. Long Sintered Steel Carbonation Stone, 2

micron pore size. 1.5-in. TC fitting with 1/4-in. NPT inlet.

SP1/4BV-NPT. (868). 1/4” NPT Stainless Steel Ball Valve. Valve body is made of

304 stainless. Valve seat is PTFE.

SP-ADPT-1.5TC-1/4FNPT. Dwg# 18072. NPT Adapter | Tri Clamp 1.5 in. x FNPT

1/4 in. – SS304. (SP1.5TCX1/4NPT-F)

SPOX. Inline Oxygenation Assembly. Includes Tee, Sight Glass, Custom Sintered

Aeration ‘Stone’, 2 Clamps, 2 Gaskets.

SP-T-1.5TC. Dwg# 18200. Long Tee | Tri Clamp 1.5 in. – SS304 / 3A. (SP1.5TEE)

SP-CL-1.5TC-STD. Dwg# 18184. Sanitary Clamp | 1.5 in. Single Hinge – #2

Standard – SS304 – Weight 220g / 7.7oz.. (SPTC)

SP-GSKT-1.5TC-SIL. (700). Silicone Gasket | Tri Clamp 1.5 in.

SP30-180TH-TC-3.25. Inline Wort Thermometer. Dial Thermometer with Tri Clamp

connection, Range: 30 to 180F. Stem length = 3.25“.

Simple temperature control group.

GC Temperature Controller, 120V (7002). NEMA 4x single circuit Temperature

Controller / thermostat. Digital display; controls one fermenter. 120VAC.

SP-CORD-GRIP. Cord grip for thermowells. 1/2“ NPT thread for 5-12mm cord.

Black, polyamide 6 plastic, neoprene seal. IP68 rated.

SP-CL-1.5TC-STD. Dwg# 18184. Sanitary Clamp | 1.5 in. Single Hinge – #2

Standard – SS304 – Weight 220g / 7.7oz.. (SPTC)

SP1.5TG. (700). Replacement Gasket For 1.5in. Tri-Clamp Fittings.

SP-FV-PULL-1.5TC-SIL. Dwg# 18460. Butterfly Valve | Tri Clamp 1.5 in.

Pull Handle – SS304 / Silicone. (SP1.5FV)

SP1HB. (726) 1-in. hose barb x 1.5-in. TC Clamp. Extra grip design.

SP-CAP-1.5TC. Dwg# 18567. End Cap | Tri Clamp 1.5 in. – SS304 / 3A.

SP2.5DIN-WR (8940). Wrench for 2.5“ DIN fittings.

BMCO3978-03

60KW Basic Seltzer / Single Boil Kettle controls, with VFD 1 HP Pump

Internal GFCI protected breakers for heating elements

1ea. LOVE controller (for displaying & controlling Kettle temperatures)

Heat on/off switches for Kettle.

POWER REQUIREMENTS:

The above brewery can be powered by a three-phase 240 or 208V 3 phase circuit.

The unit provides complete GFCI protection. The wires are terminated to an

interior distribution panel.

Three-phase – 200 amps

BK Heaters / temp probe / float 60KW

4 ea. 15000 Watt heating elements (total wattage 60,000 watts). 2” Tri-clamp

base, j-box, and connection cable. 1 ea. Temperature probe

1 ea. Stainless safety float switch

All necessary control components (GFCI breakers, SSRs, twist locks, connectors,

display / PLC input, wiring, and labor)

All elements are individually GFCI protected

Boil Kettle Pump Cent. VSD to 1HP

Variable speed drive module for centrifugal pumps (to 1HP)

Pump

Seltzer / Kettle Pump

1HP Ampco Pump

Pump Type:Centrifugal Ampco

Motor Type: 1 HP TEFC

Flow Rate: 22 GPM at 71ft head (high speed)

MaximumTemp: 220F

Pump Head: Ampco

Housing Material: Stainless

Impeller Material: Stainless

Connections: Stainless tri-clamp

HLT Timer for Basic Controller.

Save time and labor costs – allows strike water to be ready when brewer arrives in

the AM.

Pump, 1.5 HP, VSD, Cart, EXT. 1.5HP Centrifugal pump VSD on Cart (external

seal) . Applications: Wort, water, and cider transfers and CIP. Wort/cider <

120F. Water and CIP up to boiling. Flow Rates: High pressure, low flow = 36 GPM

at 21.7PSI (50ft of head). Low pressure, high flow = 60GPM at 17.3PSI (40ft of

head). Connections: 1.5“ TC inlet, 1” TC outlet. TEFC Motor, Speed = 3500 RPM.

Comes with 240VAC/20A Plug. Variable speed, cart mounted

FOB Supplier, Freight Prepaid and Add

HEX will have approx an 8-10*F degree delta for chilling your Seltzer from

incoming ground water.

IE: 70*F incoming groundwater = 78-80*F outgoing seltzer temp to FV

HEX / Seltzer chiller: Cold water inlet temperature = 60 F max.; Wort output = 68

F min. Cast out 10 bbls in 45 minutes. Single Stage Thermaline Seltzer Chiller

T8-51 with powder coated steel frame, TAB FEET and 316SS chilling plates, TC

fittings.

FOB Washington State, Freight Prepaid and Add

5 HP Chill Star Glycol Chiller. To support *the above 2 stage wort chiller/heat

exchanger (if applicable) plus* up to (5) 10 bbl jacketed fermenters and/or brites.

This glycol chiller is not modular/expandable.

Power requirements:

208V 3 phase, 35/57 (MCA/MOP amps)

Operating weight: 1100#

Dimensions: 55L x 38W x 58H

BM GC ELAB – Small. Extreme Low ambient start kit for Chilstar Glcyol chillers, up

to 5 HP. Includes bypass timer w/ fan switch, heated receiver, crankcase pressure

regulator valve. Required if compressor is located outdoors and temperature drops

to severely cold temperatures. Consult with PRO to determine the number of

circuits needed.

Consider a SPLIT system with glycol indoors, or consider putting the whole unit

indoors. Indoor units require 8500 CFM of fresh, cool air and 3 feet on all sides and

above. Split systems quoted separately.

Upsized Glycol Pump for Glycol Chiller. For a Chill Star glycol chiller.